0.4mm Nozzle Hotend Complete Kit for Bamboo Lab 3D Printers（P1P, P1S）

About this item

【Compatible Models】 This hot-end kit is compatible with P1, P1P, and P1S 3D printers. The fan is pre-fixed, so installation can be completed and printing can be resumed immediately without applying cooling silicone grease. 【Unique Integrated Nozzle】 The integrated nozzle and the heating block are integrally formed, and are directly connected to the radiator through a precision metal throat. The heat conduction path is shorter and the temperature rises significantly faster than the traditional structure; at the same time, the integrated design greatly reduces the risk of failure when replacing the nozzle. 【Highly integrated】The ceramic heater and resistor are packaged in the same metal terminal module, and the terminals are firmly connected to maintain stability under continuous high temperatures or frequent thermal cycles. 【Rapid Heating】 The high-efficiency ceramic heater can heat the nozzle to 300 ° C in a short time and is equipped with high-precision thermosensitive elements to achieve stable temperature control. 【Safety Cooling Fan】When the fan blades are blocked for 1 - 3 seconds, the drive circuit will automatically power off; automatically try to restart after 2 - 6 seconds. After 72 hours of testing, the fan was still undamaged and could continue to work normally. 【P1P, P1S Hotend Complete Kit】 The kit contains 0.4 mm nozzle, fan, resistor, and ceramic heater. It is compatible with common 3D printing wires can be directly replaced.

• 【P1P, P1S Hotend Complete Kit】 The kit contains 0.4 mm nozzle, fan, resistor, and ceramic heater. It is compatible with common 3D printing wires can be directly replaced
• 【Safety Cooling Fan】When the fan blades are blocked for 1 - 3 seconds, the drive circuit will automatically power off; automatically try to restart after 2 - 6 seconds. After 72 hours of testing, the fan was still undamaged and could continue to work normally
• 【Rapid Heating】 The high-efficiency ceramic heater can heat the nozzle to 300 ° C in a short time and is equipped with high-precision thermosensitive elements to achieve stable temperature control
• 【Highly integrated】The ceramic heater and resistor are packaged in the same metal terminal module, and the terminals are firmly connected to maintain stability under continuous high temperatures or frequent thermal cycles
• 【Unique Integrated Nozzle】 The integrated nozzle and the heating block are integrally formed, and are directly connected to the radiator through a precision metal throat. The heat conduction path is shorter and the temperature rises significantly faster than the traditional structure; at the same time, the integrated design greatly reduces the risk of failure when replacing the nozzle
• 【Compatible Models】 This hot-end kit is compatible with P1, P1P, and P1S 3D printers. The fan is pre-fixed, so installation can be completed and printing can be resumed immediately without applying cooling silicone grease

Specifications

ASIN

B0FLK3L5BV

Brand

ANCHImsr

Model

P1 Series Hotend Kit

Brand Name

ANCHImsr

Unit Count

1 Count

Part Number

A3DPJ001

Manufacturer

ANCHImsr

Cooling Method

forced air

Item Highlight

Full Assembly 0.4 mm Hardened-Steel Nozzle, Ceramic Heater, Thermistor, Fan and Extruder Heating Block Replacement

Number of Items

1

Number of Packs

1

Customer Reviews

4.9 4.9 out of 5 stars (18) 4.9 out of 5 stars

Best Sellers Rank

#33,856 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #522 in 3D Printer Accessories

Compatible Devices

Desktop

Included Components

P1P, P1S Hotend Complete Kit

Power Connector Type

4-Pin