3/4" Brass Electric Solenoid Valve 12V 12 VDC Volt DC Water Air Gas VITON NC B21

About this item

This is the EHCOTECH B21V-3/4-CC-12VDC, a 3/4" brass solenoid valve built for general purpose water, air, fuel, or gas setups. It's normally closed, runs on 12V DC, and uses a Viton diaphragm and plunger tip so it handles diesel, gasoline, glycol, and gases as well as plain water and air. The semi-direct acting design gives it solid low-pressure performance and gravity-feed capability, working across 0-145 psi or vacuum and up to 265°F. Comes standard with a lead-wire coil (IP54); a DIN connector coil (IP65) is available as an alternative.

• EHCOTECH B21V-3/4-CC-12VDC, Normally Closed 2-way solenoid valve, brass body
• 3/4" NPT female inlet and outlet, large 3/4" (20mm) orifice, Cv 7.6
• Runs on 12V DC, 1.4A, standard lead-wire coil (IP54, 5.5" leads, 1/2" conduit); DIN connector coil (IP65) also available
• FKM (Viton) diaphragm and plunger tip, works with water, air, gases, diesel, gasoline (with or without ethanol) and glycol
• Handles 0 to 145 psi (0-10 bar) or vacuum, up to 265°F (130°C) media temperature
• Semi-direct acting design for good low-pressure and gravity-feed performance; dimensions 4.3" H x 2" W x 2.7" L, weight 1 lb 10 oz

Specifications

MPN

B21V-3/4-CC-12VDC

Type

Normally Closed (N/C)

Brand

EHCOTECH

Ports

3/4" NPT Inlet and Outlet Ports

Voltage

12V, 12VDC, 12-volt DC

Material

Brass

Operation

Solenoid

Coil Options

Lead wire coil (standard), DIN connector coil

Seal Material

FKM (Viton) Diaphragm and Plunger Tip

Max Media Temp

265 F

Pressure Range

0 to 145 psi (0 to 10 BAR), Vacuum

Suitable Media

Water, Air, Gasses, Diesel, Gasoline, Glycol

Connection Size

3/4"